TJ1083PE-NG5L

GET A QUOTE

Output Power	400 VAC
Standby (ESP)	kVA	1083
Standby (ESP)	kW	866
Continuous Power (COP)	kVA	1083
Continuous Power (COP)	kW	866

Size	W x L x H (mm)	Weight (kg)	Fuel Tank (lt)	Noise dB(A) @ 7m
Canopied	TBA x TBA x TBA	TBA	TBA	TBA
Open Skid	TBA x TBA x TBA	TBA	TBA	TBA

Battery

Engine
Manufacturer	PERKINS
Model	4016-61TRS1
Cylinder Configuration	V TYPE
No of Cylinders	16
Displacement	61,123 lt
Bore	160 mm
Stroke	190 mm
Compression Ratio	12:1
Aspiration	TURBOCHARGE
Governor Type	ELECTRONIC
Cooling System	WATER
Coolant Capacity	95 lt
Lubrication Oil Capacity	286 lt
Electrical System	24 VDC
Speed / Frequency 50 Hz	1500 rpm / 50 Hz rpm
Engine Gross Power (Standby 50 Hz)	912 kW
Fuel Consumption %110 ESP 50 Hz	TBA m3/h
Fuel Consumption %100 PRP 50 Hz	238,58 m3/h
Fuel Consumption %75 PRP 50 Hz	TBA m3/h
Fuel Consumption %50 PRP 50 Hz	TBA m3/h
Exhaust Outlet Temperature 50 Hz	478 °C
Exhaust Gas Flow 50 Hz	4852 kg/h
Combustion Air Flow 50 Hz	4932 kg/h
Cooling Air Flow 50 Hz	- kg/h

Alternator
No of Phases	3
Power Factor	0,8
No of Bearings	SINGLE
No of Poles	4
No of Leads	6-12
Insulation Class	H-F
Degree of Protection	IP 23
Excitation System	AVR (Automatic Voltage Regulator), Brushless

Equipment

Engine
In Teksan generator sets, leading engine brands that have state of the art technology and have compliance with ISO 8528, ISO 3046, BS 5514, DIN 6271 standarts, are being used. These engines with low fuel consumption, provide accurate speed setting and order, Gas mixing system , also have electronic type governors.

Alternator
In products Teksan produced, leading alternator brands of the world that have state of the art technology, high quality, productivity and durability, are being used. All alternators, which pass necessary test process and found appropriate according to EC 60034-1; CEI EN 60034-1; BS 4999-5000; VDE 0530, NF 51- 100,111; OVE M-10, NEMA MG 1.22. standarts, have bearing system that does not need maintenance, with electronic type voltage regulator providing voltage setting.

Control Panel
Standard control panel, that is used in Teksan generator sets, ensures comfortable and safe usage. All measured and statistical parameters, operating modes, notice and alarms and condition of generator, are monitored easily from the control panel. On the front of the panel’s metal body has electronic control module and the emergency stop button and the panel’s metal body is made of steel sheet and is painted with electrostatic powder paint.

Teksan offers panel design and solutions that comply with special requirements of customers as well as quality standard panels.

Chassis
Chassis is manufactured from steel that has features and durability for carrying burden of generator set. Thanks to its rigid structural design and anti-vibration mounts, it reduces vibration level to minimum. All chassis contain lifting lugs. Apart from chassises that are produce by Teksan, special solutions that design in accordance with customer desires, make transportation and positioning easier.

Cooling System
System, that consists of quality industrial - type radiator, expansion tank and cooler fan, keeps the temprature of generator set’s equipments constant at a proper level.

Some Optional Equipments that Teksan provides with Generator Sets;

Medium voltage alternator,
Remote radiator applications,
Automatic fuel filling system,
Oil pan, dashboard, alternator, coil heaters,
Alternator with double AVR and PMG,
Synchronization systems,
The generator output breaker,
Grid-generator transfer switches,
Accordance with the specific volume of demand-insulated cabins,
Seismic solutions,
Trailer,
Remote monitoring.

TJ-Gas is a multifunctional control device which has wide communication topologies together with analog-digital input&output features that is specially developed for cogeneration packs and gas driven systems used for industrial purposes.
Both the number of analog-digital input&output can be configured.
Thanks to its AFR control, ignition system, engine knocking control system and monitoring features, TJ-Gas is a unique control device solution for cogeneration, trigeneration packs as well as gas generator sets.
Wide range of gas engine ECUs are available on the device.
The unit can control genset, mains and coupling circuit breakers through more than one bus systems. All operations such as loading, load-shedding, load-sharing and synchronization can be executed according to the nominal load of the system.
It has ROCOF, VectorShift and genset differential protection functions.
Thanks to its superior PLC interface, varieties of genset, cogeneration and trigeneration scenarios can be executed. Mimic diagram can be displayed on the screen panel. Also, some indicators can be monitored on the screen panel such as rpm, current, load, voltage and can be exported into excel. Thanks to the high capacity memory of the device, all indicators, failures and other essential data can be recorded during the operation.
TJ-Gas device unit complies and mostly exceeds world’s tightest safety, EMC,vibration and environmental standards for the industrial category.
Software features are complete with easy firmware upgrade process through USB port. The Windows based PC software allows monitoring and programming through USB, RS-485, RS-232, Ethernet, GPRS, dynamic and static IP and cloud server (AirGate).
The PC and server based Scada software allows monitoring and control of an unlimited number of gas gensets, cogeneration and trigeneration power packs from a single central location.

AMF unit with uninterrupted transfer
Synchronization
Circuit breaker control for mains, genset and coupling,
Auto loading, load shedding and sharing (power management),
AFR Control
ROCOF, VectorShift and Differential Protection
Remote Monitoing&Management
Analog&Digital Input&Output Configuration

2 phase 3 wires, L1-L2
2 phase 3 wires, L1-L3
3 phase 3 wires, 3 CTs
3 phase 3 wires, 2 CTs (L1-L2)
3 phase 3 wires, 2 CTs (L1-L3)
3 phase 4 wires, star
3 phase 4 wires, delta
1 phase 2 wires

Basket